Mountfield 2125H Manual de instrucciones descargar pdf (Pagina 20)

Engine Model:

RV150 and SV150

RV40, V35

Page

20 of 36 Mountfield150cc Selfhelp Guide 2011, Issue 1.0

D: Micro switch not engaging:

1. Hold the OPC bar gently in to the main

handle and listen for a faint click coming

from the back right hand corner of the

engine. You are checking here for a

micro-switch engaging which allows the

electrical feed to the spark plug. If there is

no audible click it may be that the micro-

switch is not fully engaged.

2. In this case, follow the OPC cable down to

the back right hand corner of the engine

where the lever moves when the OPC is

depressed. Come BACKWARDS along

the bare metal cable (2) some 8cms to

where the metal bracket (5) grips the

black plastic cable covering (directly

below the fuel filler).

3. Release the plastic cable cover by

compressing the 2 lugs (X) inwards on the

plastic cable cover that are splayed out

and hold it in place. Feed the black

plastic cable cover BACKWARDS through

the bracket (5).

4. With a pair of pliers bend the metal

bracket (5) BACKWARDS 4 mm towards

the handle, and then replace the cable in

the bracket. This will now engage the

micro-switch by pulling it further, and you

should now be able to start the mower in

the normal way.

E: Faulty coil:

If the coil is faulty there will be no spark. This is a job to be carried out by

your local service dealer.

Your local ServiceLink centre can be found at

www.servicelink.org.uk

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Sin comentarios

Mountfield 2125H Manual de instrucciones Pagina 20